SCR denitration | biomass boiler denitration technology


Release time:

2022-11-24

Biomass boiler is a boiler which uses biomass energy as biomass fuel. In order to promote the national environmental protection policy, jointly improve air quality, synchronous improvement of environmental protection, deeply create clear water and blue sky.

Actively and orderly promote ultra-low emissions. There are many types of biomass boiler fuel, low calorific value, uniform feed caused by the uniformity of the combustion zone is super, resulting in more temperature changes in the combustion zone, the boiler outlet initial nitrogen oxide emission concentration is relatively large,

There are many denitrification methods of biomass flue gas, including SNCR denitrification technology and SCR denitrification technology. SCR denitrification technology is more widely used.

SCR denitrification technology (selective catalytic reduction method) to control the NOx in the exhaust of diesel engine, using NH3 and urea as reducing substances, under the action of a certain temperature and catalyst, NOx is reduced to N2 and H2O, to ensure that NH3 reacts with O2 to produce N2 and H2O, to avoid NH3 leakage caused by secondary pollution.

In the treatment of biomass boiler exhaust gas, the nitrogen oxide generation pathway is mainly generated by the oxidation of nitrogen in the air at high temperature, and the NOx generated in this way is called thermogenic NOx. Its production is a function of temperature of the flame structure. SCR treatment does not require modification of the equipment body, only for exhaust gas treatment.

In SCR technology, the SCR reactor is arranged between the economizer of the boiler of the thermal power unit and the waste heat of the air. The flue gas enters the SCr reactor vertically, and the temperature is between 300and 400. After multi-layer catalyst module, the NOx is reduced to harmless N2 and H2O, and the denitrification efficiency is greater than 95%.