Metal filter for petroleum chemical fiber chemical industry-Guangdong GRVNES Environmental Protection Technology Co., Ltd.

Metal filter for petroleum chemical fiber chemical industry

Technology Introduction With the continuous advancement of VOCs pollution prevention, online monitoring of atmospheric VOCs has become an important means of pollution source management, and cities such as Shanghai, Tianjin, and Shenzhen have explicitly requested online monitoring. However, the monitoring and management of VOCs is extremely challenging and even a problem internationally. At present, the monitoring products and monitoring methods on the market are varied and mixed. Technical advantages TVOC online monitoring introduction - PID Monitoring the scope of use: Total Volatile Organic Compounds Total Volatile Organic Compounds Leegool-TVOC intelligent analyzer, mainly for TVOC, is a general term for indoor volatile organic gases other than carbon monoxide, carbon dioxide, carbonic acid and carbonate. It contains benzenes, alkanes, aromatic hydrocarbons, alkenes, halocarbons and esters. Classes, aldehydes, ketones, etc.

Key words:

chemical and monitoring of the vocs organic volatile online pollution

Category:

Service line:

Detailed

Technology Introduction

The core components of the metastable special metal anti-scaler are made of a special metastable alloy material. This alloy material is made by high-temperature compounding of various metal elements with different electronegativity. By strictly controlling the distribution ratio of various elements and using a special hot working process, columnar crystals with uniform orientation are formed inside the material. The structure is such that the metastable alloy material exhibits a uniquely unique function of releasing free electrons into the fluid medium and causing polarization effects in the fluid medium. When the fluid medium flows through the metastable alloy material at a certain flow rate, the metastable alloy material can release electrons to the fluid, change the electrostatic position of the fluid, make the anion and cation in the fluid difficult to combine to form scale, and at the same time enable the scaled scale It gradually dissolves and falls off to achieve the functions of anti-scaling and descaling.

The composition and structure of the metastable special metal anti-scaling device has significant technical advantages compared with the traditional anti-scaling and descaling methods:

1. Energy saving - the device is non-magnetic, non-electric, does not require additional energy supply, the device itself is not consumed, and the service life is 10 years;

2, safety - only need to be connected in series in the pipeline, working conditions are not affected by pressure, temperature, magnetic field or other factors, easy to install and maintain;

3, environmental protection - no chemical additives, no pollution of the treated fluid, no additional emissions, saving chemical treatment costs;

4, sterilization - inhibit algae growth, prevent the formation of new algae, can kill SRB bacteria, slow down the sludge in the tank;

5. Soften and remove the existing scale and rust to prevent the formation of corrosion inside the pipe wall;

6. Improve equipment use efficiency, extend equipment life, and reduce equipment and operating costs;

7, suitable for high temperature 5 ° C - 280 ° C, high pressure 0-25 MPa;

8, saving chemical costs and hot oil cleaning costs.

In the industrial process, scales inside equipment and pipelines are inevitable due to metal corrosion, inorganic salt crystallization, organic matter polymerization, solid particle deposition and the like. The generation and accumulation of dirt may cause many problems such as blockage of pipes, increased corrosion of equipment, and reduced heat exchange efficiency.

The danger of scaling:

Boiler system: The thermal conductivity of scale is several times or even hundreds of times smaller than that of metal. When the thickness of scale reaches 8mm, the fuel consumption is above 34%, which affects the heat exchange efficiency, causes energy waste, and is also likely to cause boiler burst.

Circulating water pipeline system: scale will reduce or even block the cross-sectional area of circulating water pipeline, increase the resistance of water flow, increase the burden of pipeline and water pump, reduce the cooling effect of system equipment, and destroy the water flow channel, resulting in a decline in equipment output. index.

Oilfield oil and gas gathering and transportation system: The petroleum fluid has high salinity and hardness, and is rich in paraffin and SRB bacteria. It is easy to cause the equipment and pipeline cross-sectional area to shrink and block, resulting in oil production reduction or even production stoppage. It is also prone to localized corrosion, causing leakage or even explosion.

Related items

Ship engine exhaust gas treatment

Nitrogen oxide in the exhaust gas of marine generator set is a gas formed by the oxidation of nitrogen in the cylinder at high temperature, which is mainly composed of nitric oxide and nitrogen dioxide. Green Valley environmental protection has developed a set of "grvnes" SCR denitration system for the treatment of nitrogen oxides in the waste gas discharged by marine generators after years of painstaking research. After special design, the system can still realize high-efficiency operation under the condition of unstable exhaust temperature and gas quality; Important parts can withstand the common impurities in landfill gas and ensure the long-term stable operation of the system.

Diesel power generation waste gas treatment

Nitrogen oxides in the exhaust gas of diesel generator set are gases formed by the oxidation of nitrogen in the cylinder at high temperature, mainly composed of nitric oxide and nitrogen dioxide. Green Valley environmental protection aims at the treatment equipment of PM (particulate matter) and NOx (nitrogen oxide) in the exhaust gas of diesel generator set. Green Valley company has developed the integrated design of particle trap and SCR denitration system. The particle trap is used to treat the PM (particulate matter) in the waste gas to make it meet the environmental protection standard; SCR denitration system aims at NOx (nitrogen oxide) in waste gas to make it meet local environmental protection standards (specific standards are customized according to customer requirements).

Waste treatment and power generation exhaust treatment

Green Valley environmental protection has developed a set of "grvnes" SCR denitration system for nitrogen oxide treatment in landfill gas power generation after years of painstaking research. After special design, the system can still realize high-efficiency operation under the condition of unstable exhaust temperature and gas quality; Important parts can withstand the common impurities in landfill gas and ensure the long-term stable operation of the system.

Distributed energy exhaust treatment

Green Valley environmental protection has developed a set of "grvnes" SCR denitration system for the treatment of nitrogen oxides in distributed energy power generation after years of painstaking research. After special design, the system can still realize high-efficiency operation under the condition of unstable exhaust temperature and gas quality; Important parts can withstand the common impurities in landfill gas and ensure the long-term stable operation of the system.

Denitration treatment of power plant

Selective catalytic reduction (SCR) is used to control NOx in diesel engine exhaust. NH3 or urea (usually urea aqueous solution with mass ratio of 32.5%) is used as reducing substance. Under the condition that O2 concentration is more than two orders of magnitude higher than NOx concentration, under the action of certain temperature and catalyst, NH3 is used to reduce NOx to N2 and H2O. Because NH3 is highly selective, NOx is preferentially reduced, It does not react with O2 first, so it is called "selective catalytic reduction". For excess NH3, a certain proportion of ammonia escape catalyst (ASC) is coated at the end of SCR carrier to ensure that NH3 reacts with O2 to generate N2 and H2O and avoid secondary pollution caused by NH3 leakage. The exhaust temperature after diesel engine or gas engine turbine is generally in the range of 300 ℃ to 500 ℃, which meets the temperature conditions required for medium temperature catalytic reaction. If the temperature after vortex is higher than 500 ℃, high-temperature catalyst shall be considered, and the system cost will increase in a certain proportion.

Waste gas treatment of standby power supply

Green Valley environmental protection has developed a set of "grvnes" SCR denitration system for the treatment of nitrogen oxides in natural gas power generation after years of painstaking research. After special design, the system can still realize high-efficiency operation under the condition of unstable exhaust temperature and gas quality; Important parts can withstand the common impurities in landfill gas and ensure the long-term stable operation of the system.

Waste gas treatment of natural gas power generation

Green Valley environmental protection has developed a set of "grvnes" SCR denitration system for the treatment of nitrogen oxides in gas power generation after years of painstaking research. After special design, the system can still realize high-efficiency operation under the condition of unstable exhaust temperature and gas quality; Important parts can withstand the common impurities in landfill gas and ensure the long-term stable operation of the system.

Treatment of waste gas from anaerobic biogas power generation

Green Valley environmental protection has developed a set of "grvnes" SCR denitration system for nitrogen oxide treatment in anaerobic biogas power generation after years of painstaking research. After special design, the system can still realize high-efficiency operation under the condition of unstable exhaust temperature and gas quality; Important parts can withstand the common impurities in landfill gas and ensure the long-term stable operation of the system.

Waste gas treatment of gas power generation

Treatment of waste gas from biomass biogas power generation

Green Valley environmental protection has developed a set of "grvnes" SCR denitration system for the treatment of nitrogen oxides in biomass biogas power generation after years of painstaking research. After special design, the system can still realize high-efficiency operation under the condition of unstable exhaust temperature and gas quality; Important parts can withstand the common impurities in landfill gas and ensure the long-term stable operation of the system.

Advisory Message

If you need to know more information and products about Green Valley Environmental Protection, you can contact us by leaving a message or by phone, and we will provide you with professional services and products. Welcome to call the service hotline：+86-769-89957788

Submit

24-hour service hotline

+86-769-89957788/89

TEL: +86-18929258795
FAX:+86-769-86101550
E-MAIL: kefu@grvnes.cn
ADD:No.18Dongsheng Road, Shilong Town, Dongguan City,Guangdong Province

Official account

Wechat